Wireless Remote Control Switch – 12V Power On/Off for Starlink Mini

Wireless Remote Control Switch – 12V Power On/Off for Starlink Mini
433MHz RF | DC 8–86V | 30A Relay | 100m Range | 2 Remotes Included

Turn your Starlink Mini on and off from up to 100 metres away — no need to walk back to the battery or crawl under the bonnet. This compact wireless relay switch sits inline with your 12V power setup and gives you instant remote control of your dish using the included two-button key fob transmitters. Perfect for camp setups, ute trays, and permanent vehicle installs where the battery isn't always within easy reach.

Includes: 1× relay receiver, 2× remote control key fobs, 1× product manual, 4× insulated terminals.

Wireless Remote Switch – Control Your Starlink Mini From the Camp Chair

Operating on a reliable 433MHz RF frequency, this switch delivers strong signal penetration through vehicle panels, canopy walls, and camp setups with a range of up to 100 metres in open conditions. The 30A relay comfortably handles the Starlink Mini's power draw (20–25W typical), and the wide DC 8–86V input range means it works with any 12V or 24V battery system. The receiver is compact at just 62.5mm × 43.5mm × 28.9mm — small enough to tuck beside your fuse box or inside a canopy electrical panel.

✔️ 100m Wireless Range — 433MHz RF signal penetrates vehicle panels, canopy walls, and camp structures. Extendable antenna for improved reception.
✔️ 30A Relay Capacity — Handles the Starlink Mini's power requirements with massive headroom. Rated for 100,000+ switching cycles.
✔️ Wide Voltage Range (DC 8–86V) — Works with 12V, 24V, and higher voltage battery systems. Output voltage matches input.
✔️ 4 Operating Modes — Latched (default on/off), Momentary, Toggle, and Delay Timer to suit your specific setup.
✔️ Two Remote Key Fobs Included — Keep one on your keys, one in the glovebox. Receiver stores up to 20 transmitters.
✔️ Compact & Easy to Install — Wire inline with your existing 12V power cable using the included insulated terminals. No modification to your Starlink Mini required.
✔️ Built for Australian Conditions — Rated from −40°C to +80°C for summer heat and alpine cold.

Specifications:
Frequency: 433MHz RF | Voltage: DC 8–86V | Max Load: 30A | Range: Up to 100m (open air) | Receiver Sensitivity: −112dBm | Operating Modes: Latched, Momentary, Toggle, Delay | Dimensions: 62.5mm × 43.5mm × 28.9mm | Operating Temperature: −40°C to +80°C | Weight: ~157g

Wires inline with your existing 12V setup in minutes using the included insulated terminals. Ships in Latched mode (press ON to activate, OFF to deactivate) — ready to use straight out of the box. No apps, no Bluetooth pairing, no Wi-Fi required — just simple, reliable RF switching.

Whether you're running your Starlink Mini from a ute tray battery, a canopy power system, or a camp setup where the power source is out of easy reach — this wireless switch gives you convenient on/off control without leaving your seat or your swag.

For step-by-step setup and pairing instructions, see our Wireless Remote Switch Setup Guide.

Common Questions

Q: What does this do?
A: A wireless remote switch that lets you turn your Starlink Mini’s power on and off from inside the vehicle — no need to climb up to the roof or unplug cables.

Q: How far does the remote work?
A: The wireless remote works within typical vehicle range — from inside the cab to a roof-mounted dish is well within range.

Q: Do I need to wire this in?
A: Yes — it wires inline with your existing DC power cable. Basic 12V wiring knowledge is needed, or any auto electrician can fit it in minutes.